Building and Flying Related Boards › miniMax, Hi-Max, and AirBike General Discussions
PhilNovember 8, 2018, 11:45pm
I've been wondering if cylinder shoad be installed.
Besides, no rotax provisions mentioned in this case so
Should need to clarify since in addition I'll be operating this lil engine
In tropic area. Any thoughs? Thanks for your inputs.
Regards,
Phil V.
texasbuzzardNovember 8, 2018, 11:58pm
Phil my 277 did great on my max-103 without any shroud on the cylinder. The 277 has deep fins at the needed locations. An air shroud would be needed if the engine is enclosed under a cowl.
Monte
(unknown)November 9, 2018, 3:37am
No shroud with 277 on skypup, engine never overheated or let me down.
PhilNovember 9, 2018, 11:22pm
Fine. Thank you guys.
And will attached bolts with hole on its head (on red)
To secure safety wires(violet) on spark plug cap.
(unknown)November 18, 2018, 4:13am
Wrap safety wire around the base of your spark plug , run a strand of safety wire through the loop you just made, run a strand of safety wire through 1/8 fuel line and loop it over the spark plug
