My Hi-Max project

Vane4kaOctober 5, 2009, 8:14pm

HI, all.
My name is Ivan, I live in Kiev, Ukraine.
His project I started in 2006, next year plan to finish. I will post photos of construction, as long as there is one question.
As a wire management if you do not use Teleflex cable?

I own Hi-Max 1700R

Vane4kaOctober 5, 2009, 8:16pm

I own Hi-Max 1700R

Vane4kaOctober 5, 2009, 8:18pm

I own Hi-Max 1700R

aeronutOctober 5, 2009, 8:57pm

Hi Ivan; it looks like you are well on your way to a flying airplane. Welcome to the site. Best wishes for the future of your project.

never surrender; never give-up

(unknown)October 5, 2009, 9:37pm

Welcome Ivan to this BBS. Looks like you are doing a good job on your plane. Don't forget to ask questions! Harold

Knut AOctober 5, 2009, 11:55pm

Welcome on board Ivan!
It seems to be a fine plane you make. Are you going to remove the staples?
Have you decided what kind of engine you will use for the bird?
Knut A

Randy lewisOctober 6, 2009, 1:04am

In response to your question, I think you were asking how to support the push / pull tube if you do not use the cable. Here is what I did.

theecoopOctober 6, 2009, 10:01am

Welcome aboard. keep us posted

Perfect Practice makes perfect!

Vane4kaOctober 6, 2009, 6:40pm

Quoted from Knut A Welcome on board Ivan!
It seems to be a fine plane you make. Are you going to remove the staples?
Have you decided what kind of engine you will use for the bird?
Knut A

Thank you all for your kind words.
Yes, I delete all the staples. Engine will ROTAX 503/582 or RMZ 640 (it's Rossia analog Rotax 503) or Trabant 601.

I own Hi-Max 1700R

Vane4kaOctober 6, 2009, 6:46pm

Randy, but as you have done aileron control?
Rigid rod only at the elevator? And not a very clear picture that this is a swing with ropes.

Regards,
Ivan.

I own Hi-Max 1700R

Vane4kaOctober 6, 2009, 6:54pm

I planned to do so, but something is not very good at it.
Sorry for my English.

I own Hi-Max 1700R

iterOctober 8, 2009, 3:18am

Vaneчka, welcome and thank you for sharing your photos. Your English is fine. Help is available if you need it.

Randy, thank you for posting your push-pull setup. I wonder if you have photos of the other end of the tube.

Ari.

Knut AOctober 8, 2009, 9:42am

Ivan and Ari
We had some discussions about this item in May this year.
Here it the tread:
http://www.lonesomebuzzards.co.....ight-push-pull/#num0
Knut A

Vane4kaNovember 11, 2009, 10:02pm

What is done today.
1. modified rudder pedal

I own Hi-Max 1700R

Vane4kaNovember 11, 2009, 10:10pm

2. Window frame
On the glass does not see this example.

I own Hi-Max 1700R

Vane4kaNovember 11, 2009, 10:12pm

3.
Wheel & lock doors

I own Hi-Max 1700R

Vane4kaNovember 11, 2009, 10:15pm

Whel & lock doors next
lock doors of furniture guide

I own Hi-Max 1700R

Vane4kaNovember 11, 2009, 10:16pm

Window

I own Hi-Max 1700R

theecoopNovember 11, 2009, 10:24pm

Looking Awsome,reminds me of the himax I started over 20 years ago

Perfect Practice makes perfect!

acam37November 12, 2009, 12:24am

I really like the rudder pedals. After I fly mine a while that is one thing I'm going to change on my Himax. Looks like an easy design change.

djohnNovember 12, 2009, 1:32pm

Nice rudder pedal setup, PLEASE put some kind of flat washer or other limiting device so as the cable attach swivels wear the aluminum plates cannot become detached.

Dennis

Vane4kaFebruary 21, 2010, 9:14pm

Continue to build